3 Using Your Printer
45
▌
[Administrator Menu] > [PCL Settings] >
[Output Size]
Specifies the default paper size.
• Selecting a custom size for the paper size prompts you to enter a custom length and width.
▌
[Administrator Menu] > [PCL Settings] >
[Orientation]
Specifies how text and graphics are oriented on the page.
▌
[Administrator Menu] > [PCL Settings] >
[2-Sided]
Specifies whether to print on both sides of a sheet of paper. For a two-sided printing, you can specify the
printout to be bound by the long edge or short edge.
▌
[Administrator Menu] > [PCL Settings] >
[Font]
Specifies the default font from the fonts registered in the printer.
▌
[Administrator Menu] > [PCL Settings] >
[Symbol Set]
Specifies a symbol set for a specified font.
▌
[Administrator Menu] > [PCL Settings] >
[Font Size]
Specifies the font size for scalable typographic fonts. Font size refers to the height of the characters in the font.
One point equals approximately 1/72 of an inch (approximately 0.35 mm).
• This setting is only available for typographic fonts.
▌
[Administrator Menu] > [PCL Settings] >
[Font Pitch]
Specifies the font pitch for scalable mono spaced fonts. Font pitch refers to the number of fixed-space characters
in a horizontal inch of type. For non-scalable mono spaced fonts, the pitch is displayed, but cannot be changed.
• This setting is only displayed for fixed or mono spaced fonts.
▌
[Administrator Menu] > [PCL Settings] >
[Form Line]
Sets the number of lines in a page. The printer sets the amount of space between two vertical lines based on the
[Output Size] and [Orientation] menu items. Select the correct paper size and orientation before changing this
setting.
▌
[Administrator Menu] > [PCL Settings] >
[Quantity]
Sets the default print quantity. Set the number of copies required for a specific job from the print driver. Values
selected from the print driver always override values selected from the operator panel.
▌
[Administrator Menu] > [PCL Settings] >
[Image Enhance]
Specifies whether to make the boundary line between black and white smoother to decrease jagged edges and
enhance the visual appearance.
To Next Page
Loading...
Need help?
General
