Fujitsu Airstage J-II - High Static Pressure Duct Type

HIGH STATIC PRESSURE DUCT TYPE1-6.
MODELS : ARXC36GBTH, ARXC45GATH, ARXC60GATH,

ARXC72GBTH, ARXC90GBTH
These indoor units allow for high airow quantities.
FEATURES

Easy installation (Compact size & Lightweight)
z
Model : ARXC36
A compact size and
lightweight indoor unit has
been developed by reducing
the basic chassis and the
overall material weight.
Low noise
z
Models : ARXC36 /
ARXC45 / ARXC60
Cutting off the
corners of the
conventional indoor
unit front panel and fan casing, has enabled
less turbulent air ow. Low noise is realized by
adopting a plastic case and a plastic fan.
NOTE: ARXC60, ARXC72, and ARXC90 can not be connected in J-II Series and J-IIS Series.
Low energy consumption by high
z
efciency DC fan motor :
ARXC36/ARXC72/ARXC90
Improved motor efciency from previous
model.
ARXC36
ARXC72 / 90
Static pressu
z
re selection :
ARXC36/ARXC72/ARXC90
By using DC fan motor, it is possible to
change static pressure range from 0 to
200Pa (ARXC36) / 300Pa (ARXC72/
ARXC90). The change of static pressure
range is possible by function setting with
wired / wireless remote controller.
[m
3
/h]
Air ow rate
[Pa]
200
or
300
0
Conventional
model
New model
(ARXC36)
800mm
400mm
500mm
400mm
225mm
240mm
Metal fan
Plastic fan
Heat exchanger
Heat exchanger
Casing (Metal Sheet) Casing (Plastic)
Previous model :
( S series )
New model :
Metal fan [53.1dB(A)]
Plastic fan [42dB(A)]
(ARXC36)
*Model : Material
(At 100Pa : Actual
noise measurement
value)
400
500
1,050
400
800
1,250
Volume
47.5%
do wn
Weight
46.5%
do wn
Previous model : 75kg
( S series )
(Unit : mm)
New model : 40kg(ARXC36)
- (04 - 06) -
INDOOR UNITS INDOOR UNITS