EasyManua.ls Logo

Fujitsu Airstage J-II - Wired Remote Controller

Fujitsu Airstage J-II
836 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WIRED REMOTE CONTROLLER2-7.
MODEL : UTY - RLR
FEATURES
Various timer setup (ON / OFF / WEEKLY) are possible.
Equipped with weekly timer as standard function.
(Start / Stop, Temp, Mode function is twice per day for a week)
When setting up a timer, start / stop and the temperature setup
can be changed.
When a failure occurs, the error code is displayed.
Error history.(Last 16 error codes can be accessed.)
Up to 8 indoor units can be simultaneously controlled.
The room temperature can be controlled by detecting the
temperature accurately with Built-in thermo sensor.
High performance and compact size
z
In addition to the individual control, various energy saving controls can be realized using one
remote controller only.
Individual
control
Thermo
sensor
Weekly
timer
Auto off
timer
Accurate and comfortable control
z
Indoor temperature can be detected accurately by the inclusion of a thermo
sensor in the body of the wired controller.
Various energy saving control
z
Auto OFF Timer
The indoor unit automatically turns off after a set time
has passed.
Set off time
(30 to 240 minutes)
ON Auto OFF
OFF
Weekly Timer
4 setting changeable per day of week (Setting items:
On/Off, Temperature, Mode, Time)
Set Temperature Auto Return
The setting temperature automatically returns to the
previous setting temperature.
The time range in which the set temperature can be
changed is 1 to 4 hours (30 minutes interval).
Setting temp.
Setting temp.
Cooling operation
24°C
22°C
Set temperature change Auto return
11:40 13:40
Time
Settable time range
1 to 4 hours
Heating operation
25°C
23°C
Set temperature change Auto return
11:40 13:40
Time
Settable time range
1 to 4 hours
Set Temperature Upper and Lower Limit
Setting
The set temperature range can be set for each operation
mode. (Cooling / Heating / Auto)
Original temp.
setting range
Lower limit
setting
During Cooling
30°C
25°C
18°C
Original temp.
setting range
Upper limit
setting
During Heating
30°C
25°C
10°C
Room temperature sensor
- (05 - 63) -
CONTROL
SYSTEM
CONTROL
SYSTEM

Table of Contents

Other manuals for Fujitsu Airstage J-II

Related product manuals