Fujitsu Airstage J-II - Adaptor; Convertor Units; Bacnet GATEWAY; Network Convertor; Network Convertor for L

ADAPTOR / CONVERTOR UNITS3.
The following types of convertors and adaptors are available.
Network Convertor (UTY-VGGXZ1)
•
- For connecting single split type system.
( A change of DIP switch setting is necessary )
- For connecting group remote controller(s).
Network Convertor for L
•
ON
W
ORKS
®
(UTY-VLGX)
For connection between VRF network system and a L
ON
W
ORKS
®
open network for
management of small to medium-sized BMS.
BACnet
•
®
Gateway (UTY-ABGX: Software)
The central control of maximum 1600 indoor units can be realized by connecting the VRF
network system to the BACnet
®
, a global standard for open networks.
Signal Amplier (UTY-VSGXZ1)
•
When the total length of transmission line exceeds 500 m or the number of units exceeds 64,
Signal amplier will be necessary.
External Switch Controller (UTY-TEKX)
•
Air conditioner switching can be controlled by connecting other sensor switches.
- (05 - 99) -
CONTROL SYSTEM CONTROL SYSTEM