Fujitsu Airstage J-II - Easy Installation

EASY INSTALLATION1-5.
EASIER INSTALLATION

Easy piping connection
z
Improvement of the reliability by decreasing the are connection.
Flare connection
Terminal box
Flare
connection
EV kit
J-II series
Previous model
Power supply cable
Power supply
(Indoor )
Power supply
(Outdoor )
Easy wiring connection
z
• Decreasing wiring mistakes by using non-polar 2 wires.(Remote controller cable is 3 wires)
• Improvement of wiring installation by common with V-II power supply method.
Flexible installation of outdoor unit
z
Corresponds to the outdoor unit concentration installation.
Reduced installation intervals
by front access
Flexible installation by
4 way pipe direction
CONVENIENT COMMISSIONING SUPPORT

Automatic address setting function
z
The address of each indoor unit can be
automatically set by button switch of outdoor
unit.
3 7 1 0 2 4 5 6
Press the push button
of outdoor unit.
Connection check function
z
Possible to conrm whether wiring
connection and address setting are correct
by check run function for a short time .
・Display connected indoor unit
numbers
・Duplicately set address number of
indoor unit can be displayed
Easy to connect with V-II communication system
z
It is possible to connect directly with the transmission cable of the V-II system without
convertor.
J-II system V-II system
Connects without a converter
- (01 - 08) -
GENERAL INFORMATION GENERAL INFORMATION