WIRELESS REMOTE CONTROLLER2-11.
MODEL : UTY - LNH
FEATURES
4 mode timer setup available (ON / OFF / PROGRAM / SLEEP). ●
Up to 16 indoor units connected within the remote controller group ●
can be simultaneously controlled.
Can be used jointly with wired remote controllers. ●
Easy to change custom code (max. 4 units). ●
Built-in timers
z
Select from four different timer programs (ON / OFF / PROGRAM / SLEEP).
Program timer
z
The program timer operates the on and off timer once within a 24-hour period.
Sleep timer
z
The sleep timer function automatically corrects the temperature thermostat setting according to the
time setting to prevent excessive cooling and heating while sleeping.
Easy installation and operation
z
System addressing
z
• During installation work, system addressing can
be performed using the wireless remote controller,
thus eliminating manual switch setting.
NOTE:
Timer setting from a wireless remote controller becomes invalid, if the indoor unit is connected
with a wired or a simple remote controller.
60min.
1 °C
2 °C
Timer setting
1 °C
30min.
60min.
90min.
2 °C
3 °C
4 °C
Timer setting
Cooling operation / dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The set
temperature can drop to a maximum of 4 °C.
• Custom code is used for controlling
right indoor unit. (Up to 4 codes can
be set.)
• Wide and precise
transmitting range.
A B C D
A B
C
D
Mixed-up
After code change
Transmission line
Indoor unit
Wireless
remote controller
- (05 - 84) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
