Fujitsu Airstage J-II - Revision Code

REVISION CODE3.
ABOUT REVISION CODE

The following functions are different according to Revision code.
Revision code
Remarks
None or A B
Indoor unit *1
Forced stop function

*2
○
Energy saving software
UTY-PEGX

○
Setting of Auto louver grille
kit (option)

*3
○
For Slim duct type only
*1: Applicable models
Type Model name
Compact cassette AUXB07, 09, 12, 14, 18, 24LALH
Cassette AUXD18, 24LALH, AUXA30, 36, 45, 54LALH
Low Static Pressure Duct/Concealed Floor ARXB07, 09, 12, 14, 18LALH
Slim Duct/Slim Concealed Floor ARXD07, 09, 12, 14, 18, 24LATH
Low Static Pressure Duct/ ARXB24, 30, 36, 45LATH
Medium Static Pressure Duct ARXA24, 30, 36,45LATH
High Static Pressure Duct ARXC36, 45LATH
Floor / Ceiling AB*A12, 14, 18, 24LBTH
Ceiling AB*A30, 36, 45, 54LBTH
Wall Mounted (EEV external) AS*E07, 09, 12, 14LACH
Wall Mounted AS*A07, 09, 12, 14, 18, 24, 30LACH
*2: ARXD07, 09, 12, 14, 18, 24LATH (Slim Duct), AB*A12, 14, 18, 24LBTH (Floor/Ceiling), AB*A30, 36, 45, 54LBTH
(Ceiling), AS*A18, 24, 30LACH (Wall Mounted) are available regardless of revision code.
*3: When attaching Auto louver grille on indoor units ARXD07, 09, 12, 14, 18, 24LATH (Slim Duct type), use the
indoor unit with Revision Code B.
If indoor unit with Revision Code other than “B” is used, the louver does not work properly.
(Malfunctions such as the louver does not open when the operation is started, or the louver opens when the
operation is stopped will occur.)
METHOD OF DISTINGUISHING REVISION CODE

Indoor unit
z
Rating Label
Serial No.
Revision Code: None or A; X0XXXXX
B; X2XXXXX
Revision Code
Carton Label
Revision code
- (01 - 20) -
GENERAL INFORMATION GENERAL INFORMATION