SEPARATION TUBE3-3.
INSTALLATION
Separation tube
z
Separation tube
UTP-AX090A
Installation
z
Connections
Field pipe
Joint pipe (Separation tube)
Joint pipe
(Separation tube)
Field pipeReducer or
Expander
Select the connections with the pipe diameters that match the selected pipe sizes from the
separation tubes, and cut them with a pipe cutter.
When the pipe size of the separation tube itself does not match, or when piping sizes differ
even if it cuts the pipe, use attached Reducer or attached Expander.
Standard cutting
position: 1/2L
+3
-0
mm
NOTE: Insert the eld pipe rmly until it touches the joint pipe (Separation tube).
- (06 - 34) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
