Fujitsu Airstage J-II - Page 361

Various convenient functions
z
Displays setting status and Limitations
• The remote controller settings can be easily checked.
Summer Time display
• This function can be set easily
from Menu screen.
Child lock
• Lock / unlock method: Push the ON/
OFF button and the screen for 4
seconds.
Name Registration
• Indoor unit names can be registered in
the remote controller screen.
This makes it easy to identify the indoor
unit you want to control in the room.
Simplied installation
z
Use of non-polar 2-wire type
• Faulty wiring can be prevented by using non-polar
2-wire.
OK OK
non-polar
2-wire
Y1
Y2
Y1
Y2
I.U. I.U.
Y1Y2Y3 Y1Y2Y3
Auto Address Setting/Setting Position
Notication
• Reduces errors and install time compared with the
current specication Rotary switch.
• When setting the remote controller groups, it can also be
done automatically by the new Wired remote controller
address.
• After the auto address setting of the new wired remote
controller groups, the address can be conrmed.
04
05
Address →
03 02 01
The appropriate indoor unit
performs the air blow and
LED lamps blink
Easy Maintenance
z
Error History Display
• The errors that occur in the indoor unit or re-
mote controller are saved as a history.
• A maximum of 32 error incidents can be saved.
Backlight
z
• Backlight enable easy operation in a darkened
room.
• For the lighting time of Backlight, 30 or 60 seconds
can be set.
• The backlight is lit while the buttons are operated
and goes off 30 or 60 seconds after the operation
stops.
- (05 - 57) -
CONTROL SYSTEM CONTROL SYSTEM