Decide the mounting position with the customer as follows:
(1) Install EV kit level on strong wall, oor, ceiling which is not subject to vibration.
(2) Install EV kit where the connection pipe can be easily installed.
(3) Install EV kit where vibration and noise are not amplied.
(4) Take servicing, etc. into consideration and leave the space as follows.
INSTALLATION METHOD
CAUTION
The installation direction can be selected either horizontal (Pattern A) or vertical (Pattern B),
but keep the inclination within 5º.
Pattern A
Horizontal installation
Level
Cord
Cord
Level
Vertical installation
Pattern B
Incorrect installation direction or angle may cause improper operation.
Suspended installation
z
(1) Remove the 2 screws (M4x10) and replace them with the hanger.
(2) Use the hanger bolts to fasten the hanger.
Hanger
M10 hanger bolt
(Field supplied)
Special nut A
Special nut B
Screw
(M4 x 10)
- (06 - 41) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
