ATTACH THE INSULATION MATERIAL
Insulate by the coupler heat insulation arround the pipe.
Couper heat insulation Couper heat insulation
No gapNo gap
WIRING PROCEDURE
(1) Connect the EV kit cord to the indoor unit.
(2) Wrap the tube arround the connection, and fasten both ends binders.
(3) Connect the ground to the indoor unit.
CAUTION
Never bundle the cord with power supply.
Indoor unit
Connect Tube (short)
Wire (indoor unit)
Binder (small)
Ground
EV kit cord
SPECIFICATIONS
Model name UTR-EV09XB UTR-EV14XB
Dimensions (mm)
(H x W x D)
121 x 416 x 65
Weight (g) 1500
Connection cord length (m) 5
- (06 - 43) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
