Fujitsu Airstage J-II - Page 608

LED105
CODE No.
Setting Mode
LED104
CODE No.
Setting Function
Factory
setting
Remarks
1 4 Prohibited
0 0 Prohibited
l
Setting prohibited
0 1 Prohibited
0 2 Prohibited
0 3 Prohibited
0 4 Prohibited
1 6 Prohibited
0 0 Prohibited
l
Setting prohibited
0 1 Prohibited
0 2 Prohibited
0 3 Prohibited
0 4 Prohibited
1 7
Height
difference
between indoor
units
0 0 Standard
l
If installing the indoor units (even only one set)
to a lower oor than the outdoor unit, and the
height difference between the indoor units is
3m or greater (i.e., if installing the indoor units
on separate oors), set "02 (height difference)".
0 1 Prohibited
0 2 Height difference
0 3 Prohibited
0 4 Prohibited
- (07-82) -
FUNCTION SETTING FUNCTION SETTING