Fujitsu Airstage J-II - Page 668

MODELS : ARXD04GALH, ARXD07GALH, ARXD09GALH,

ARXD12GALH, ARXD14GALH, ARXD18GALH,
ARXD24GALH
MODELS : ARXA24GBLH, ARXA30GBLH, ARXA36GBLH,

ARXA45GBLH
MODELS : ARXC36GBTH,ARXC72GBTH,ARXC90GBTH

Change the air ow setting depending on the external static pressure is different from Normal
static pressure.
Setting of air ow can be changed by exchanged by wireless remote controller, wired remote
controller, and simple remote controller.
How to set air ow (external static pressure)
Wireless remote controller

●
Air ow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-3 INDOOR UNIT (setting by wireless remote controller).
Wired remote controller

●
Air ow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-4. INDOOR UNIT (setting by wired remote controller).
Simple remote controller

●
Air ow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-5 INDOOR UNIT (setting by simple remote controller).
Wired remote controller (Touch panel)

●
Air ow is set by function number 26 (static pressure).
Refer to "FUNCTION SETTING" and "FUNCTION DETAILS" in 2-6. INDOOR UNIT (setting
by wired remote controller [Touch panel]).
Note
Setting of static pressure must be fall within the static pressure setting range described in ●
"Chapter 4. FAN PERFORMANCE CURVE".
Static pressure setting out of the static pressure setting range may cause product ●
malfunction such as capacity degradation or water leakage.
- (07-142) -
FUNCTION SETTING FUNCTION SETTING