Fujitsu AIRSTAGE J-IIIL - Page 676

¢ Remote perform function
Function defined as “F3” on the outdoor unit can be performed remotely.
a
b
a
b
c
d
e
f
h
g
h
g
When selecting the function applied to
multiple outdoor units
When selecting the function applied to
one outdoor unit
a Adapter name selection
Selects the transmission adapter that connects the target unit.
b Function selection
Selects the function to be operated remotely. The window display varies depending on the select-
ed function.
c Outdoor unit selection (for the function applied to multiple outdoor units)
Specifies the outdoor unit to be operated remotely. After the function is performed, the result is
displayed.
d Refrigerant system address selection
Specifies the refrigerant system address which the outdoor unit to be operated remotely belongs
to.
e Outdoor unit selection
Specifies the outdoor unit to be operated remotely.
f Result (for the function applied to one outdoor unit)
After the function is performed, the result is displayed.
g Start button
Performs setting of the value input at the write value field of
d
for the unit selected in
d
.
Thereafter, the setting contents result is displayed at the read value field of
d
for check use.
After setting is completed, subsequent processing can be canceled by clicking the button again.
2-3. Setting by service tool (UTY-ASGXZ1) - (07-76) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS