Fujitsu AIRSTAGE J-IIIL - Page 691

¢ Indoor unit function setting
1. In initial display of the setting mode, by pressing SET TEMP. “ ” button or SET TEMP. “ ”
button, select a remote controller address. (Select the indoor unit you want to operate.)
Initial display of
a
ddress setting mode
Example: When remote controller address
“
01” is selected
Remote controller address
2. Press the FAN button. “Function number” indicator flashes.
Function number
3. Set up the function number by pressing SET TEMP. “ ” button or SET TEMP. “ ” button.
Function number
4. Press the FAN button. “Setting number” indicator flashes.
Setting number
5. Set up the setting number by pressing
SET TEMP. “
” button or SET TEMP. “ ” button.
Setting number
Example) Function number: 30; Setting number: 01
2-7. Indoor unit (setting by UTY-RSKU, UTY-RHKU) - (07-91) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS