■
Host Affinity Creation
Create an association between a host group and a CA port group and an association between a host group
and a LUN group to enable the host to recognize a LUN group.
The procedure to create a host affinity is as follows:
1 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click [Create
Host Affinity] in [Action].
The [Create Host Affinity] screen appears.
2 Select "Host Group - CA Port Group" in "Target Connection".
3 Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated.
(1) Click the [Browse] button in [Host Group].
A screen to select the host group appears.
(2) Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
• When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
• When "All" is selected
Select a host response, and then click the [OK] button.
(3) Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4) Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in [CA Port Group].
(5) Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6) Select the LUN group that is to be associated, and then click the [OK] button.
The name of the selected LUN group is displayed in [LUN Group].
4 Check the path between the host and the host interface port on the ETERNUS DX in [Host - CA Port Con-
nection], and click the [Create] button.
A confirmation screen appears.
5 Click the [OK] button.
The host affinity is created and the registration completion screen appears.
Chapter 5
Component Expansion/Function Enhancement
5.4 Adding Servers
108
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
