Fujitsu ETERNUS DX100 S3 - Figure 1.22 Host Interface for Copper Twinax Cable Connection (Installed in a Controller); Figure 1.23 Iscsi 10 Gbit;S (10 GBASE-T) Interface, Iscsi 1 Gbit;S Interface (Installed in a Controller)

● iSCSI 10Gbit/s (10GBASE-SR), FCoE, Ethernet 10Gbit/s (for Copper Twinax Cable Connection)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
Figure 1.22 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)
1
2
3
4
5
6
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
● iSCSI 10Gbit/s (10GBASE-T), iSCSI 1Gbit/s
The ports on the host interface are used to connect LAN cables. This port uses an RJ-45 connector.
Figure 1.23 iSCSI 10Gbit/s (10GBASE-T) Interface, iSCSI 1Gbit/s Interface (Installed in a Controller)
1
2
3
4
5
6
1.
Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
31
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0