Fujitsu ETERNUS DX100 S3 - Power Distribution Units (2 U); Figure 1.48 Power Distribution Unit (AC200-240 V, 2 U, 12 Outlets); Figure 1.49 Power Distribution Unit (AC200-240 V, 2 U, 16 Outlets)

1.4.2 Power Distribution Units (2U)
2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
■
Power Distribution Unit (AC200-240V, 2U, 12 Outlets)
There are 12 outlets.
Figure 1.48 Power Distribution Unit (AC200-240V, 2U, 12 Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
■
Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
There are 16 outlets.
Figure 1.49 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
Chapter 1 Component Names and LED Names
1.4 Power Distribution Units (for Regions other than the EMEIA, North American, Central American, and Caribbean Regions)
49
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0