Fujitsu ETERNUS DX100 S3 - Figure 1.13 Host Interface for FC Cable Connections (Equipped with SFP+ Modules in All Ports and Installed in the Controllers); Figure 1.14 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)

● iSCSI 10Gbit/s (10GBASE-SR), Ethernet 10Gbit/s (for FC Cable Connection)
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port
uses a Dual LC connector.
Figure 1.13 Host Interface for FC Cable Connections (Equipped with SFP+ Modules in All Ports and Installed in the
Controllers)
1
2
3
4
5
6
1.
Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
● iSCSI 10Gbit/s (10GBASE-SR), Ethernet 10Gbit/s (for Copper Twinax Cable Connection)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
Figure 1.14 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)
1
2
3
4
5
6
1.
Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
24
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0