Fujitsu ETERNUS DX100 S3 - Rear; Figure 1.29 Rear View of a Drive Enclosure (When Only One I;O Module Is Installed); Figure 1.30 Rear View of a Drive Enclosure (When Two I;O Modules Are Installed)

1.2.2 Rear
This section provides the names of the components in the rear of a drive enclosure.
•
When only one I/O module is installed
Figure 1.29 Rear View of a Drive Enclosure (When Only One I/O Module Is Installed)
12
34
1. I/O module (IOM#0)
2. Cover
Remove this when installing an additional I/O module (optional).
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
•
When two I/O modules are installed
Figure 1.30 Rear View of a Drive Enclosure (When Two I/O Modules Are Installed)
12
34
1.
I/O module (IOM#0)
2. I/O module (IOM#1)
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
Chapter 1 Component Names and LED Names
1.2 2.5"/3.5" Type Drive Enclosures
35
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0