Fujitsu ETERNUS DX100 S3 - Components (Internal); Figure 1.42 Drives for High-Density Drive Enclosures; Figure 1.43 Drive Slot Numbers for High-Density Drive Enclosures

1.3.4 Components (Internal)
This section describes drives in high-density drive enclosures.
■
Drives
Figure 1.42 shows the drives for a high-density drive enclosure. Figure 1.43 shows the slot number of each
drive.
Figure 1.42 Drives for High-density Drive Enclosures
Figure 1.43 Drive Slot Numbers for High-density Drive Enclosures
Slot#0 Slot#12 Slot#24 Slot#36 Slot#48 Slot#1 Slot#13 Slot#25 Slot#37 Slot#49 Slot#2 Slot#14 Slot#26 Slot#38 Slot#50 Slot#3 Slot#15 Slot#27 Slot#39 Slot#51 Slot#4 Slot#16 Slot#28 Slot#40 Slot#52 Slot#5 Slot#17 Slot#29 Slot#41 Slot#53 Slot#8 Slot#20 Slot#32 Slot#44 Slot#56 Slot#9 Slot#21 Slot#33 Slot#45 Slot#57
Slot#10 Slot#22 Slot#34 Slot#46 Slot#58
Slot#11 Slot#23 Slot#35 Slot#47 Slot#59
Slot#6 Slot#18 Slot#30 Slot#42 Slot#54 Slot#7 Slot#19 Slot#31 Slot#43 Slot#55
Front
Rear
Chapter 1 Component Names and LED Names
1.3 High-density Drive Enclosure
44
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0