Fujitsu ETERNUS DX100 S3 - Figure 1.24 SAS Interface (Installed in a Controller); Figure 1.25 Ethernet 1 Gbit;S Interface (Installed in a Controller)

● SAS 6Gbit/s
The ports on the host interface are used to connect SAS cables. This port uses a miniSAS (SFF-8088) connec-
tor.
Figure 1.24 SAS Interface (Installed in a Controller)
1
2
3
4
5
6
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
● Ethernet 1Gbit/s
The ports on the host interface are used to connect LAN cables. This port uses an RJ-45 connector.
Figure 1.25 Ethernet 1Gbit/s Interface (Installed in a Controller)
1
2
3
4
5
7
8
9
10
6
1.
Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface port (CA#0, Port#2)
5. Host interface port (CA#0, Port#3)
6. Host interface (CA#1)
7. Host interface port (CA#1, Port#0)
8. Host interface port (CA#1, Port#1)
9. Host interface port (CA#1, Port#2)
10. Host interface port (CA#1, Port#3)
Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
32
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0