Fujitsu ETERNUS DX100 S3 - Figure 1.34 3.5 Drives; Figure 1.35 Drive Slot Numbers (3.5 Type Drive Enclosure); Table 1.8 Status and Meanings of each LED (Drive (Drive Enclosure) (2.5;3.5 Type))

● 3.5" Drives
Figure 1.34 shows the 3.5" drive. Figure 1.35 shows the slot number of each 3.5" drive.
Table 1.8 shows the status and meanings of each LED.
Figure 1.34 3.5" Drives
1
2
1.
DRIVE READY LED
2. DRIVE FAULT LED
Figure 1.35 Drive Slot Numbers (3.5" Type Drive Enclosure)
Slot#0
Slot#4
Slot#8
Slot#1
Slot#5
Slot#9
Slot#2
Slot#6
Slot#10
Slot#3
Slot#7
Slot#11
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.8 Status and Meanings of Each LED (Drive (Drive Enclosure) (2.5"/3.5" Type))
LED name
LED status Meanings
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
•
The drive is in error status.
•
The LED light up operation was performed from the ETERNUS
CLI command line in order to identify the drive location.
Chapter 1 Component Names and LED Names
1.2 2.5"/3.5" Type Drive Enclosures
38
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0