Chapter 5
Component Expansion/Function Enhancement
For the ETERNUS DX, customers can expand (add) the following optional products.
•
Drives
•
Drive enclosures
•
Long wave SFP+ modules
This chapter explains the handling instructions and installation procedures for these optional products.
Make sure to read "Safety Precautions" before performing any of these procedures.
When adding servers to be connected, refer to "5.4 Adding Servers" (page 103).
5.1 Installing Additional Drives
Drives can be installed while the ETERNUS DX is running without affecting the system.
This section explains how to install drives in the ETERNUS DX.
•
Do not uninstall or move a drive that is already installed.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
5.1.1 Installable Drives
For installable drives, refer to "Product List".
67
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
