Status of the ETERNUS DX is monitored periodically, and the result is displayed as a general status icon with
character strings.
Table 3.1 General Status of ETERNUS Web GUI
Status Description
(green)
The ETERNUS DX is in a normal state.
(red)
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
(red)
The ETERNUS DX is in error state.
(orange)
The ETERNUS DX is under maintenance.
(yellow)
The ETERNUS DX is in warning state.
For details, refer to "Configuration Guide (Web GUI)".
3.3 Displaying Status via ETERNUS CLI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked by send-
ing the status display command via ETERNUS CLI.
CLI> show status
Summary Status [Normal]
CLI> show status
Summary Status [Error]
CLI> show status
Summary Status [Warning]
The general status of the ETERNUS DX indicates whether an error status component or a warning status com-
ponent exists in the storage system.
Table 3.2 General Status of ETERNUS CLI
Status
Description
Empty An undefined or uninstalled component exists in the ETERNUS DX.
Normal The ETERNUS DX is in a normal state.
Pinned Data Pinned data exists in the ETERNUS DX.
Unused An undefined component is installed in the ETERNUS DX.
Warning The ETERNUS DX contains a component that requires preventive maintenance.
Maintenance The ETERNUS DX is under maintenance.
Error An error has occurred in a component that is installed in the ETERNUS DX.
Loop Down The ETERNUS DX is in BackEnd Down status.
Not Ready An abnormality is detected and access from the host cannot be received.
Subsystem Down The ETERNUS DX cannot be used.
Change Assigned CM CM hot expansion recovery is required.
Chapter 3 Storage System Monitoring
3.3 Displaying Status via ETERNUS CLI
61
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
