Fujitsu ETERNUS DX100 S3 - Power Distribution Units (for Regions Other than the EMEIA, North American, Central American, and Caribbean Regions); Power Distribution Units (1 U); Figure 1.47 Power Distribution Unit (AC200-240 V, 1 U, 4 Outlets)

1.4 Power Distribution Units (for Regions other than the EMEIA,
North American, Central American, and Caribbean Regions)
There are two sizes for power distribution units: 1U and 2U.
1.4.1 Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
Figure 1.47 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
3
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
Chapter 1 Component Names and LED Names
1.4 Power Distribution Units (for Regions other than the EMEIA, North American, Central American, and Caribbean Regions)
48
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0