Fujitsu ETERNUS DX100 S3 - Chapter 3 Storage System Monitoring; Checking LED Status; Displaying Status Via ETERNUS Web GUI; Figure 3.1 ETERNUS Web GUI Screen

Chapter 3
Storage System Monitoring
This chapter describes the status monitoring of the ETERNUS DX.
3.1 Checking LED Status
The status of the ETERNUS DX can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.
3.2 Displaying Status via ETERNUS Web GUI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked in the
Overview screen of ETERNUS Web GUI.
Figure 3.1 ETERNUS Web GUI Screen
Table 3.1 shows the general status.
60
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0