Fujitsu ETERNUS DX100 S3 - 2.5;3.5 Type Drive Enclosures; Front; Figure 1.27 Front View of a 2.5 Type Drive Enclosure; Figure 1.28 Front View of a 3.5 Type Drive Enclosure

1.2 2.5"/3.5" Type Drive Enclosures
Drives and an operation panel are installed in the front of 2.5" and 3.5" type drive enclosures. I/O modules
and power supply units are installed in the rear.
1.2.1 Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 1.27 Front View of a 2.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type
Figure 1.28 Front View of a 3.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 3.5" drive
3. Flange cover
Chapter 1 Component Names and LED Names
1.2 2.5"/3.5" Type Drive Enclosures
34
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0