■
About Shock
•
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
mat or other soft material to cushion the drives against physical shocks.
•
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
5.1.3 Additional Drive Installation Procedure
This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
•
If components are installed in a way other as described in this section, damage
and/or device failure or electrical shock may occur.
•
Do not install drives that are for use in other devices.
Chapter 5
Component Expansion/Function Enhancement
5.1 Installing Additional Drives
69
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
