Fujitsu ETERNUS DX100 S3 - Figure 1.41 Disk Activity Panel (DAP); Table 1.12 Status and Meanings of each LED (Disk Activity Panel (DAP))

■
Disk Activity Panel (DAP)
The Disk Activity Panel (DAP) has a Slot No. LED for each drive.
Figure 1.41 shows the Disk Activity Panel (DAP). Table 1.12 shows the status and meanings of each LED.
Figure 1.41 Disk Activity Panel (DAP)
1
1.
Slot No. LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.12 Status and Meanings of Each LED (Disk Activity Panel (DAP))
LED name
LED status Meaning
Slot No.
(green)
The drive is in normal status.
(blinks green)
(amber)
•
The drive is in error status.
•
The LED light up operation was performed from the ETERNUS
CLI command line in order to identify the drive location.
Chapter 1 Component Names and LED Names
1.3 High-density Drive Enclosure
43
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0