Fujitsu ETERNUS DX100 S3 - Drive Handling Instructions

5.1.2 Drive Handling Instructions
■
About Condensation
Do
•
When moving a drive from a cold place, such as an unconditioned store house in
winter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15°C of temperature difference) to adapt to the new temperature.
■
About Static Electricity
Do Not
•
Do not touch the surface of the board of the drives.
Do
•
When handling drives, wear a wrist strap or touch a metal part to discharge the
human body's natural static electricity. Failure to discharge static electricity may
cause failure in the ETERNUS DX.
•
Leave the drive in its package until ready to install it.
Chapter 5
Component Expansion/Function Enhancement
5.1 Installing Additional Drives
68
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0