Fujitsu ETERNUS DX100 S3 - Figure 1.17 Ethernet 1 Gbit;S Interface (Installed in a Controller)

● Ethernet 1Gbit/s
The ports on the host interface are used for connecting a controller to a server with a LAN cable. This port
uses an RJ-45 connector.
Figure 1.17 Ethernet 1Gbit/s Interface (Installed in a Controller)
1
2
3
4
5
7
8
9
10
6
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface port (CA#0, Port#2)
5. Host interface port (CA#0, Port#3)
6. Host interface (CA#1)
7. Host interface port (CA#1, Port#0)
8. Host interface port (CA#1, Port#1)
9. Host interface port (CA#1, Port#2)
10. Host interface port (CA#1, Port#3)
Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
26
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0