Fujitsu ETERNUS DX100 S3 - Audit Log; Figure 3.2 Event Notification; Figure 3.3 Audit Log

■
Host Sense
When an event occurs in the ETERNUS DX, host senses (sense codes) are sent to the server. For details on
sense codes, refer to "Message List".
Figure 3.2 Event Notification
SNMP managerMail server Syslog server
Remote
support
center
REMCS/AIS Connect
Host sense
Server (host)
syslog
SNMP Trap
E-mail
ETERNUS DX
3.5 Audit Log
By setting audit log, audit trail logs (hereinafter referred to as "audit log") that record performed operations
by using the ETERNUS DX and the system actions that are associated with these operations can be sent to
the Syslog server.
For the procedure on setting audit logs, refer to "Configuration Guide (Basic)". For log information, refer to
"Message List".
Figure 3.3 Audit Log
System administrator
Login
Logout
Setting change
↓
↓
Device name
User/role
Process time
Process details
Process result
etc.
Audit log
ETERNUS DX
Syslog server
Chapter 3
Storage System Monitoring
3.5 Audit Log
63
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0