66
1. Select the [System Settings] tab on the top menu.
2. Select the [Standby Mode] tab on the left side menu.
The "Standby Mode" screen appears.
3. Press the [List] button for the "Logout after" input field.
A list of "Logout after" times appears.
4. Select the desired time before automatic log out.
The default time is "5min".
5. Press the [List] button for the "Standby after" input field.
A list of "Standby after" times appears.
6. Select the desired time before standby mode.
The default time is "15min".
7. Press the [OK] button.
The scanner is set to first standby and then automatically log out after the specified times.
If the [Never] button is selected for "Logout after", the selected time
for "Standby after" is used as the wait time before switching to
standby mode.
If a button other than [Never] is selected, set a "Standby after" time
that is longer than the "Logout after" time.
To Next Page
Loading...
