Fujitsu FI-6010N - Pre-Maintenance Preparations

466
8.7 Pre-Maintenance Preparations
Before sending the scanner for maintenance, the user data store and system settings should be
backed up. Refer to the following sections for details:
z "Backing up the User Data Store" from "4.10.1 Maintaining the User Data Store" (page
161)"
z "4.10.2 Maintaining the System Settings" (page 167)
After backing up the user data store and system settings, the original data may be deleted. Refer to
the following sections for details:
If the hard disk is replaced, all settings will revert to their factory default values.
z "Clearing the User Data Store" (page 166) from "4.10.1 Maintaining the User Data Store"
(page 161)"
z "Clearing the System Log" (page 160) from "4.10.2 Maintaining the System Settings"
(page 167)
ATTENTION
The user data store may contain private information such as e-mail
addresses or fax numbers, so care should be taken when managing such
data.