258
■ [Back] button
Returns to the Central Admin Console main window.
z If "Auto Login" is set to [On] on the [System Settings] - "Login Settings"
screen, the Admin Tool cannot be started.
z Scanners are identified by their IP addresses. If the scanner information
includes multiple scanners with the same IP address, scanners which
are not to be targeted may be connected.
If the scanner is not started, using Wake-On-LAN to start the scanner and
connect with the Admin Tool will take a few minutes.
If a "Connection error" occurs, and the screen returns to the screen for
specifying a connection, try re-connecting.
To Next Page
Loading...
