Fujitsu FI-6010N - Setting the Login Method

4.6 Using the System Settings Menus
fi-6010N Network Scanner Operator's Guide 67
4
4.6.7 Setting the Login Method
The login settings are as follows.
z Automatic login settings
Set the scanner to automatically login without displaying the "Login" screen, when the
scanner power is switched on or restarted.
For automatic login, the user name and password specified in the "Login Settings" screen is
used. However, if the scanner automatically logs out, or the [Logout] button is pressed, the
"Login" screen is displayed.
z guest account validity
Set whether or not to enable login with the guest account.
1. Select the [System Settings] tab on the top menu.
2. Select the [Login Settings] tab on the left side menu.
 The "Login Settings" screen appears.
3. Select whether or not to enable automatic login.
The default setting is [Off].
Select the [On] button to enable automatic login.
Select the [Off] button to disable automatic login.