Fujitsu FI-6010N - Setting up a Firewall for the Central Admin Server; Configuring the Scanner Settings for Central Admin Management

236
5.4.3 Setting up a Firewall for the Central Admin Server
This section describes how firewall settings for the Central Admin Server.
Set the following port number for communication in the Central Admin Server, to enable manage-
ment by the Central Admin Console.
For details about setting a firewall, refer to the manual for the relevant firewall.
5.4.4 Configuring the Scanner Settings for Central Admin Management
This section describes the scanner settings environment.
The following settings for connecting a scanner to the Central Admin Server are required to enable
management by the Central Admin Console.
z "Admin Network" screen from the "Network Settings" tab
For more details, refer to "4.7.2 Setting the Admin Network" (page 84).
z "Central Admin Server" screen from the "Network Settings" tab
For more details, refer to "4.7.3 Setting a Central Admin Server" (page 86).
From/To Protocol Port Number
Scanner  Central Admin Server HTTP/
HTTPS
(TCP)
Port number set for scanner
communication
Central Admin Console  Central Admin Server HTTP/
HTTPS
(TCP)
Port number set for Central
Admin communication