404
6.14 Processing a Job
This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the "Job Menu" screen, press the [Job] button.
The "Message Screen" appears.
When you are included in multiple job groups, the "Job Menu" screens can
be switched by using the job menu switch buttons.
z If either the title or message is not set in [Message Screen] on the "Job
Details" window, even if the [Message Screen] button is set to [On], the
"Message Screen" will not be shown. For more details, refer to Step 4 of
"4.11.2 Setting a Job Sequence" (page 181).
z If "Off" is selected for the [Message Screen] button, scanning is started
without showing the "Message Screen", and the job is processed. For
more details, refer to "6.14.1 Enabling/Disabling the Message Screen"
(page 408).
z When the [Message Screen] button is disabled, whether or not the "Mes-
sage Screen" is shown depends on the settings configured by the admin-
istrator.
To Next Page
Loading...
