Fujitsu FI-6010N - Installing;Uninstalling an Add-In Module; Installing an Add-In Module

4.10 Using the Maintenance Menus
fi-6010N Network Scanner Operator's Guide 173
4
4.10.4 Installing/Uninstalling an Add-in Module
An Add-in is an application created using the fi-6010N SDK (Developer's Kit).
This section describes how to install and uninstall an Add-in module.
■ Installing an Add-in Module
1. Select the [Maintenance] tab on the top menu.
2. Select the [Add-in Manager] tab on the left side menu.
 The "Add-in Manager" screen appears.
3. Select an Add-in installation file.
Press the [Browse] button to select a file.
4. Press the [Install] button.
 A confirmation message appears.
5. Press the [OK] button.
 After the Add-in module has been installed, the scanner is restarted.