6.9 Setting the Scan Options
fi-6010N Network Scanner Operator's Guide 363
6
6.9 Setting the Scan Options
6.9.1 Carrier Sheet
Set whether or not to use a Carrier Sheet. If a Carrier Sheet is to be used, set the output size of the
scanned image.
1. On the "Scan Settings" screen, select the [Basic] tab.
2. Press the [Carrier Sheet] button.
The "Carrier Sheet Output Image Size" screen appears.
3. If a Carrier Sheet is to be used, select the output size for the scanned image.
This returns you to the "Scan Settings" screen. The selected setting is displayed to the
right of the [Carrier Sheet] button.
Carrier Sheet Setup Status
Off Scan without using a Carrier Sheet
A3 Scan with a Carrier Sheet, and output as A3 size (297 × 420mm)
B4 Scan with a Carrier Sheet, and output as B4 size (257 × 364mm)
11" × 17" Scan with a Carrier Sheet, and output as a "11 × 17 inch" size
(279.4 × 431.8mm)
*: All paper sizes are of portrait orientation.
To Next Page
Loading...
