Fujitsu FI-6010N - Maintenance

6.13 Maintenance
fi-6010N Network Scanner Operator's Guide 403
6
6.13 Maintenance
6.13 Maintenance
1. On the "Main Menu" screen, press the [Maintenance] button.
 The "Maintenance" screen appears.
z Pressing the [Edit e-Mail Addresses] button opens the "e-Mail Address Book" screen.
e-Mail addresses can be added, edited, or deleted on the "e-Mail Address Book" screen.
For details, refer to "6.4.2 Adding a Contact to the e-Mail Address Book" (page 318),
"6.4.3 Editing a Contact in the e-Mail Address Book" (page 320), or "6.4.4 Deleting a Con-
tact from the e-Mail Address Book" (page 321).
z Pressing the [Edit Fax Numbers] button opens the "Fax Number List" screen.
Fax numbers can be added, edited, or deleted on the "Fax Number List" screen.
For details, refer to "6.5.2 Adding a Contact to the Fax Number List" (page 327), "6.5.3
Editing a Contact in the Fax Number List" (page 329), or "6.5.4 Deleting a Contact from
the Fax Number List" (page 330).
z Pressing the [Roller Cleaning] button opens the "Roller Cleaning" screen.
The "Roller Cleaning" screen allows the feed rollers to be step rotated for cleaning.
For details, refer to "Feed rollers" (page 421).
z Pressing the [Scan Test] button starts scan test. Scanned data can be checked on the "Scan
Viewer" screen.
Use this to check that the scanner scans normally.
For more details about the "Scan Viewer" screen, refer to "7.7 Performing a Scan Test"
(page 436).