Fujitsu FI-6010N - Sending the Scanned Data by Fax

322
6.5 Sending the Scanned Data by Fax
1. On the "Main Menu" screen, press the [Fax] button.
 The "Send Fax" screen appears.
2. Enter a fax number into the "Recipient Fax No." field.
Recipient fax numbers may be up to 64 digits long.
Numbers and the following symbols can also be used.
-*#
3. In the "Notification To (Sender’s e-Mail Address)" field, enter an e-mail address for
Send Fax result alert e-mails.
For more details about E-mail Address setting values, refer to "B.1 e-Mail Address Setting
Values" (page 478).
HINT
The scan information can be changed by pressing the [Scan Settings] but-
ton.
For more details, refer to "6.9 Setting the Scan Options" (page 356).
HINT
Recipient fax numbers can be selected directly from the fax number list.
For details, refer to "6.5.1 Selecting a Fax Number from the Fax Number
List" (page 324).