426
7.5 Cleaning the Carrier Sheet
If the surface or interior of the Carrier Sheet becomes dirty or dusty, use a soft dry cloth slightly
moistened with Cleaner F1 (sold separately) or a mild detergent, to lightly wipe off the dirt and
dust.
z Never use paint thinner or other organic solvents.
z Do not rub too hard, as the Carrier Sheet may become scratched or deformed.
z After cleaning the interior of the Carrier Sheet, wait until it has completely dried
before closing it.
z As a guideline, it is recommended to replace the Carrier Sheet every 500
scans. For details about purchasing a Carrier Sheet, refer to "7.6.5 Purchasing
the Carrier Sheet" (page 435).
To Next Page
Loading...
