Fujitsu FI-6010N - Setting the Scanner Name

58
4.6.2 Setting the Scanner Name
A scanner name may be set to provide a network alias for the device.
1. Select the [System Settings] tab on the top menu.
2. Select the [Scanner Name] tab on the left side menu.
 The "Scanner Name" screen appears.
3. Enter a Scanner Name.
Scanner names may be up to 15 characters long.
Alphanumeric characters (case sensitive) and hyphens may be entered.
Scanner names cannot consist of numerical characters only.
A hyphen cannot be used as the first character of a scanner name.
ATTENTION
Do not use a name already being used in the network.
Name duplication will cause a network connection error. For more details
about how to deal with such errors, refer to "E.1.1 Administrator Screen
Messages" (page 493).