Fujitsu FI-6010N - Setting the Language

4.6 Using the System Settings Menus
fi-6010N Network Scanner Operator's Guide 61
4
4.6.3 Setting the Language
1. Select the [System Settings] tab on the top menu.
2. Select the [Language/Keyboard Selection] tab on the left side menu.
 The "Language/Keyboard Selection" screen appears.
3. Press the [List] button for the "Language" input field.
 A list of languages appears.
4. Select a language.
Select the desired language for the operating environment.
 This returns to the "Language/Keyboard Selection" screen.
5. Press the [OK] button.
 A language setting confirmation message appears in the selected language.
6. Press the [OK] button.
 The system is restarted.
HINT
You can select whether or not to display this screen again at the next
scanner startup. To display the screen again, for "Show the "Lan-
guage/Keyboard Selection" screen at next start up?",
press the [Yes] button. To not display this screen at next start up, press
the [No] button.