Fujitsu FI-6010N - Editing a Contact in the Fax Number List

6.5 Sending the Scanned Data by Fax
fi-6010N Network Scanner Operator's Guide 329
6
6.5 Sending the Scanned Data by Fax
6.5.3 Editing a Contact in the Fax Number List
Fax contact numbers edited in the list are accessible to all users.
1. Open the "Fax Number List" screen.
To access the "Fax Number List" screen, on the "Send Fax" screen, press .
Or on the "Main Menu" screen, press the [Maintenance] button, then on the "Maintenance"
screen, press the [Edit Fax Numbers] button. For details, refer to "6.13 Maintenance" (page
403).
2. Select the fax contact that is to be edited.
3. Press the [Edit] button.
 The "Edit Fax Number" screen appears.
4. Edit the contact information.
Recipients may be up to 64 characters long.
Fax numbers may be up to 64 digits long. Numbers and the following symbols can also be
used.
-*#
5. Press the [OK] button.
 The edited fax number list contact is saved.