Fujitsu FI-6010N - Viewing the Add-In Status

154
4.8.4 Viewing the Add-in Status
If an add-in module is installed, the following steps can be performed.
An Add-in is an application created by using the fi-6010N SDK (development kit).
1. Select the [Device Status] tab on the top menu.
2. Select the [Add-in Status] tab on the left side menu.
 The "Add-in Status" screen appears.
The following information is shown.
Info Details
Add-in Shows the name of the add-in module.
Version Shows the current add-in module version number.