Fujitsu FI-6010N - Checking the Consumable Alert Status

7.6 Replacing Parts
fi-6010N Network Scanner Operator's Guide 429
7
7.6.2 Checking the Consumable Alert Status
1. On the Main Menu, press the [Consumable Alert] button.
 The "Consumable Alert" screen appears.
2. Check which part needs to be replaced and press the [OK] button.
Parts whose "Usage Counter" value is bigger than the "Replace at" value should be replaced.
The value of the "Usage Counter" is in units of 500 sheets scanned.
For details on how to check the status of consumable parts on the administrator screen, refer
to "4.8.3 Viewing the Usage Status" (page 152).
3. Replace the part.
Part replacement procedures are detailed in the following sections, "7.6.3 Replacing the Pad
Assy" (page 430), "7.6.4 Replacing the Pick Roller" (page 431).