Fujitsu FI-6010N - Edge Cropping

6.9 Setting the Scan Options
fi-6010N Network Scanner Operator's Guide 391
6
6.9 Setting the Scan Options
6.9.18 Edge Cropping
For scanned data, the width of the area for edge cropping can be adjusted, so that unwanted sec-
tions are not scanned.
If using edge cropping, the width of the edges to be cropped can be adjusted with this setting.
1. On the "Scan Settings" screen, select the [Advanced] tab.
2. Press the [Edge Cropping] button.
 The "Edge Cropping" screen appears.
3. If edge cropping is to be used, enter the width of the edges to be cropped.
Edge Cropping Setup Status
Off Scan without cropping edges.
On Scan and crop edges.
Enter a value for Top/Bottom and Left/Right from 0 to 50.
Enter values in units of 1mm.